Archives of Acoustics, 44, 3, pp. 505–510, 2019
10.24425/aoa.2019.129265

Acoustic Analysis Using Sound Level Meter to Determine the Period of Usage of the Spindle Bearing of a Radial Drilling Machine

S. CHARLES
SNS College of Technology
India

Joslin D. VIJAYA
JCT College of Engineering and Technology
India

The condition monitoring techniques like acoustic emission, vibration analysis, and infrared thermography, used for the failure diagnosis of bearings, require longer processing time, as they have to perform acoustical measurement followed by signal processing and further analysis using special software. However, for any bearing, its period of usage can be easily determined within an hour, by measuring the bearing sound, using sound level meter (SLM). In this paper the acoustical analysis of the spindle bearing of a radial drilling machine was performed using SLM, by measuring the sound pressure level of the bearing in decibels, for different frequencies, while muting all the other noises. Then using an experimental set up, two database readings were taken, one for new bearing and the other for completely damaged bearing, both are SKF6207, which itself is the spindle bearing. From these three sets of sound pressure level readings, the period of usage of the spindle bearing, was calculated using an interpolation equation, by substituting the life of the bearing from the manufacturer’s catalogue. Therefore, for any machine with a SKF6207 bearing, its usage time can be estimated using the database readings and one measurement on that machine, all with the same speed.
Keywords: acoustical condition monitoring; radial drilling machine; spindle bearing; sound level meter; sound pressure level; sound muting transducer
Full Text: PDF

References

Ambekar A.G. (2006), Mechanical vibrations and noise engineering, Prentice-Hall of India Private Limited, India.

Sheng C., Li Z., Qin L., Guo Z., Zhang Y. (2011), Recent progress on mechanical condition monitoring and fault diagnosis, Procedia Engineering, 15, 142–146.

Devi S., Siva Kumar L., Shanker N.R., Prabakaran K.A. (2010), A comparative study between vibration and acoustic signals in HTC cooling pump and chilling pump, IACSIT International Journal of Engineering and Technology, 2, 3, 273–277.

Yanfang D., Zude Z., Mingyao L. (2016), A new model based machine tool spindle bearing preload optimization method, International Journal of Engineering and Technology, 6, 11, 416–423.

AlShammari F., Addali A. (2015), Bearing condition monitoring with acoustic emission techniques, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9, 12, 2081–2085.

Hajra Choudhury S.K., Hajra Choudhury A.K., Nirjhar Roy (2013), Elements of workshop technology, 6th Ed., Media Promoters & Publishers Pvt. Ltd., Mumbai, India, pp. 239–277.

Seo J., Choi N., Kim W., Hong D. (2012), Infrared thermography quantitative diagnosis in vibration mode of rotational mechanics, Journal of the Korean Society of Non-destructive Testing, 32, 3, 291–295.

Veggeberg K. (2008), Octave analysis explored, Evaluation Engineering, 47, 8, 40–43.

Peterson A.P.G. (2013), Handbook of noise measurement, 9th Ed., GenRad, Concord, Massachusetts.

Popoli, W. (2000), Spindle-bearing basics, Manufacturing Engineering, 125, 5, 52-52.

Senthilraja C., Vinoth L. (2015), A Review on fault diagnosis of ball bearing using sound and vibration signals, International Journal of Innovative Research in Science, Engineering and Technology, 4, 13, 381–393.




DOI: 10.24425/aoa.2019.129265

Copyright © Polish Academy of Sciences & Institute of Fundamental Technological Research (IPPT PAN)