Archives of Acoustics, 44, 2, pp. 329–337, 2019
10.24425/aoa.2019.128496

Application of Ultrasonic Methods for Evaluation of High-Pressure Physicochemical Parameters of Liquids

Piotr KIEŁCZYNSKI
Institute of Fundamental Technological Research Polish Academy of Sciences
Poland

Stanisław PTASZNIK
Institute of Agricultural and Food Biotechnology
Poland

Marek SZALEWSKI
Institute of Fundamental Technological Research Polish Academy of Sciences
Poland

Andrzej BALCERZAK
Institute of Fundamental Technological Research Polish Academy of Sciences
Poland

Krzysztof WIEJA
Institute of Fundamental Technological Research Polish Academy of Sciences
Poland

Aleksander J. ROSTOCKI
Institute of Fundamental Technological Research Polish Academy of Sciences
Poland

An emerging ultrasonic technology aims to control high-pressure industrial processes that use liquids at pressures up to 800 MPa. To control these processes it is necessary to know precisely physicochemical properties of the processed liquid (e.g., Camelina sativa oil) in the high-pressure range. In recent years, Camelina sativa oil gained a significant interest in food and biofuel industries. Unfortunately, only a very few data characterizing the high-pressure behavior of Camelina sativa oil is available. The aim of this paper is to investigate high pressure physicochemical properties of liquids on the example of Camelina sativa oil, using efficient ultrasonic techniques, i.e., speed of sound measurements supported by parallel measurements of density. It is worth noting that conventional low-pressure methods of measuring physicochemical properties of liquids fail at high pressures. The time of flight (TOF) between the two selected ultrasonic impulses was evaluated with a cross-correlation method. TOF measurements enabled for determination of the speed of sound with very high precision (of the order of picoseconds). Ultrasonic velocity and density measurements were performed for pressures 0.1–660 MPa, and temperatures 3–30°C. Isotherms of acoustic impedance Z_a, surface tension σ and thermal conductivity k were subsequently evaluated. These physicochemical parameters of Camelina sativa oil are mainly influenced by changes in the pressure p, i.e., they increase about two times when the pressure increases from atmospheric pressure (0.1 MPa) to 660 MPa at 30°C. The results obtained in this study are novel and can be applied in food, and chemical industries.
Keywords: ultrasonic methods; speed of sound; acoustic impedance; surface tension; thermal conductivity; physicochemical properties
Full Text: PDF

References

Abramovič H., Abram V. (2005), Physico-Chemical Properties, Composition and Oxidative Stability of Camelina sativa Oil, Food Technology and Biotechnology, 43, 63–70.

Ali S.K.M, Ali B. (2014), Acoustics impedance studies in some commonly used edible oils, International Journal of Innovative Science, Engineering & Technology, 1, 563–566.

Ardia A., Knorr D., Heinz V. (2004), Adiabatic heat modelling for pressure build-up during high-pressure treatment in liquid-food processing, Food and Bioproducts Processing, 82 (C1), 89–95.

Arfken G.B., Weber H.J. (2005), Mathematical Methods for Physicists, Ch.10, 6th edition, Elsevier, Amsterdam.

Auerbach R. (1948), Oberflachenspannung und Schallgeschwindigkeit, Experientia, 4, 143–144.

Bird R.B., Stewart W.E., Lightfoot E.N. (1976), Transport Phenomena, John Wiley and Sons, New York.

Ciubota-Rosie C., Ruiz J.R., Ramos M.J., Perez A. (2013), Biodiesel from Camelina sativa: A comprehensive characterization, Fuel, 105, 572–577.

Comuñas M.J.P., Bazile J.P., Baylaucq A., Boned C. (2008), Density of Diethyl Adipate using a New Vibrating Tube Densimeter from (293.15 to 403.15) K and up to 140 MPa. Calibration and Measurements, Journal of Chemical and Engineering Data, 53, 986–994.

Dzida M, (2010), Study of the Effects of Temperature and Pressure on the Thermodynamic and Acoustic Properties of 2-Methyl-1-butanol at Temperatures from 293K to 318K and Pressures up to 100MPa, International Journal of Thermophysics, 31, 55–69.

Haykin S. (2001), Communication Systems, 4th edition, John Wiley and Sons, New York.

Kamin R., Rudy M. (2011), From seed to supersonic – How Camelina powered the Navy’s premier fighter jet, The Navy’s Environmental Magazine. Currents, winter 2011.

Kiełczyński P., Szalewski M. (2011), An inverse method for determining the elastic properties of thin layers using Love surface waves, Inverse Problems in Science and Engineering, 19, 31–43.

Kiełczyński P., Szalewski M., Balcerzak A., Malanowski A., Siegoczyński R.M., Ptasznik S. (2012), Investigation of high-pressure phase transitions in DAG (diacylglycerol) oil using the Bleustein–Gulyaev ultrasonic wave method, Food Research International, 49, 60–64.

Kiełczyński P., Szalewski M., Balcerzak A., Wieja K., Rostocki A.J., Siegoczyński R.M., Ptasznik S. (2014a), Application of ultrasonic wave celerity measurement for evaluation of physicochemical properties of olive oil at high pre-ssure and various temperatures, LWT – Food Science and Technology, 57, 253–259.

Kiełczyński P., Szalewski M., Balcerzak A., Wieja K., Malanowski A., Kościesza R., Tarakowski R., Rostocki A.J., Siegoczyński R.M. (2014b), Determination of physicochemical properties of diacylglycerol oil at high pressure by means of ultrasonic methods, Ultrasonics, 54, 2134–2140.

Kiełczyński,P., Szalewski M., Balcerzak A., Wieja K., Rostocki A.J., Siegoczyński R.M. (2015), Ultrasonic evaluation of thermodynamic parameters of liquids under high pressure, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 62, 1122–1131.

Kiełczyński P., Szalewski M., Balcerzak A., Wieja K., Rostocki A.J., Ptasznik S. (2017a), Evaluation of high-pressure thermophysical parameters of the diacylglycerol (DAG) oil using ultrasonic waves, Food and Bioprocess Technology, 10, 358–369.

Kiełczyński P., Ptasznik S., Szalewski M., Balcerzak A., Wieja K., Rostocki A.J. (2017b), Thermophysical properties of rapeseed oil methyl esters (RME) at high pressures and various temperatures evaluated by ultrasonic methods, Biomass and Bioenergy, 107, 113–121.

Kondakci T., Zhou W. (2017), Recent applications of advanced control techniques in food industry, Food and Bioprocess Technology, 10, 522–542.

McClements D.J. (1995), Advances in the application of ultrasound in food analysis and processing, Trends in Food Science & Technology, 6, 293–299.

Petcu A.C, Pleşu V., Berbente C. (2016), Estimation methods for thermophysical properties of camelina sativa crude oil, University Politechnica of Bucharest Scientific Bulletin. Series B, 78, 59–70.

Popa A.L., Jurcoane S., Dumitriu B. (2017), Camelina sativa oil-a review, Scientific Bulletin. Series F. Biotechnologies, XXI, 233–238.

Povey M.J.W. (2017), Applications of ultrasonics in food science – novel control of fat crystallization and structuring, Current Opinion in Colloid & Interface Science, 28, 1–6.

Proakis J. G., Manolakis D. G. (1966), Digital Signal Processing, Principles, Algorithms and Applications, 3rd edition, Prentice Hall, New Jersey.

Rokka T., Alén K., Valajac J., Ryhänen E.-L. (2002), The effect of a Camelina sativa enriched diet on the composition and sensory quality of hen eggs, Food Research International, 35, 253–256.

Rostocki A.J., Tarakowski R., Kiełczyński P., Szalewski M., Balcerzak A., Ptasznik S. (2013),The Ultrasonic Investigation of Phase Transition in Olive Oil up to 0.7 GPa, Journal of the American Oil Chemists Society, 90, 813–818.

Shonnard D.R., Williams L., Kalnes T.N. (2010), Camelina-Derived Jet Fuel and Diesel: Sustainable Advanced Biofuels, Environmental Progress & Sustainable Energy, 29, 382–392.

Singh R.P., Heldman D.R. (2009), Introduction to Food Engineering (4th ed., Ch. 4), Elsevier, Amsterdam.

Sugasawa S. (2002), Time difference measurement of ultrasonic pulses using crosscorrelation function between analytic signal, Japanese Journal of Applied Physics, 41, 3299–3307.

Viola F., Walker W.F. (2003), A comparison of the performance of time-delays estimators in medical ultrasound, IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control, 50, no. 4, pp. 392–401.

Waraich E.J. et al. (2013), Camelina sativa, a climate proof crop, has high nutritive value and multiple-uses: a review, Australian Journal of Crop Science, 7, 1551–1559.

Zhu S., Marcotte M., Ramaswamy H., Shao Y., Le-Bail A. (2008), Evaluation and comparison of thermal conductivity of food materials at high pressure, Food and Bioproducts Processing, 86, 147–153.

Zuniga R., Le-Bail A. (2009), Assessment of thermal conductivity as a function of porosity in bread dough during proving, Food and Bioproducts Processing, 87, 17–22.




DOI: 10.24425/aoa.2019.128496

Copyright © Polish Academy of Sciences & Institute of Fundamental Technological Research (IPPT PAN)