10.1515/aoa-2017-0019
Cumulative industrial noise impact on the environment
of industrial noise sources: newly designed and existing ones, together with a proposal of accumulate other types of the noise. Evaluation of cumulative noise levels for new (designed) objects is realised by computational methods, and for existing objects, by measurements or by combination of measurement and computational methods. It is assumed that the cumulative level is an energetic sum of the rating
levels for all installations and it will not exceed the limit value in a given place. For the cumulation of different noise sources, the weighting for criterion values of these sources will be applied in aggregation.
References
Act on providing information on the environment and environmental protection, public participation in environmental protection and on environmental impact assessment (2008), [in Polish: Ustawa o udostępnianiu informacji o środowisku i jego ochronie udziale społeczeństwa w ochronie środowiska oraz ocenach oddziaływania na środowisko], Dz.U. z dn. 3 października 2008, Nr 199, poz. 1227.
Batko W., Przysucha B. (2014), Statistical analysis of the equivalent noise level, Archives of Acoustics, 39, 2, 195–198.
Berry B.F. (1989), Recent advances in the measurement and rating of impulsive noise, Proceedings of the 13th International Congresses on Acoustics, P. Pravica [Ed.], Sava Centar, Belgrade, 3, 147–150.
Canadian Environmental Assessment Agency, www.ceaa.gc.ca.
Commission Directive (EU) 2015/996 of 19 May 2015 establishing common noise assessment methods according to Directive 2002/49/EC of the European Parliament and of the Council.
Committee on Hearing, Bioacoustics and Biomechanics (CHABA) (1996), Community response to high-energy impulsive sounds: An assessment of the field since 1981, National Research Council (National Academy of Science,Washington, DC, 1996) (NTIS PB 97-124044).
Directive 2002/49/EC of the European Parliament and of the Council of 25 June 2002 relating to the assessment and management of environmental noise. Official Journal of the European Communities, L 189/12, 18.7.2002.
EN ISO 3746: 2011, Acoustics. Determination of sound power level on noise sources using sound pressure – Survey method using an enveloping measurement Surface over a reflecting plane.
Fidell S., Mestre V., Schomer P., Berry B.,Gjestland T., Vallet M., Reid T. (2011), A first-principles model for estimating the prevalence of annoyance with aircraft noise exposure, Journal of the Acoustical Society of America, 130, 2, 791–806.
Hamernik R.P., Hsueh K.D. (1991), Impulse noise: some definitions, physical acoustics and other considerations, Journal of the Acoustical Society of America, 90, 1, 189–196.
ISO 1996-2:2007, Acoustics. Description, measurement and assessment of environmental noise – Part 2: Determination of environmental noise levels.
ISO 9613-1:1993, Acoustics. Attenuation of sound during propagation outdoors – Part 1: Calculation of the absorption of sound by the atmosphere.
ISO 9613-2:1996, Acoustics. Attenuation of sound during propagation outdoors – Part 2: General method of calculation.
ISO/DIS 1996-1:2016, Acoustics. Description, measurement and assessment of environmental noise – Part 1: Basic quantities and assessment procedures.
Kłaczyński M., Wszołek T. (2014), Acoustic study of REpower MM92 wind turbines during exploitation, Archives of Acoustics, 39, 1, 3–10.
Miedema H.M.E. (2004), Relationship between exposure to multiple noise sources and noise annoyance, Journal of the Acoustical Society of America, 116, 2, 949–957.
Minister of the Environment (2013), Announcement of Minister of the Environment [in Polish: Obwieszczenie Ministra Środowiska z dnia 15 października 2013 r. w sprawie ogłoszenia jednolitego tekstu rozporządzenia Ministra Środowiska w sprawie dopuszczalnych poziomów hałasu w środowisku], Dz.U. z dn. 22 stycznia 2014 r. poz. 112.
Minister of the Environment (2014), Regulation of Minister of the Environment [in Polish: Rozporządzenie Ministra Środowiska z dnia 30 października 2014 r. w sprawie wymagań w zakresie prowadzenia pomiarów wielkości emisji oraz pobieranej wody], Dz.U. z dn. 7 listopada 2014 r., poz. 1542.
Pedersen T.H. (2008), Prominent tones in noise – Proficiency testing among 30 laboratories of the ISO1996-2 Annex C method and its predecessors, Acoustics Paris, pp. 3457–3461.
Sadler B. (1996), Environmental assessment in a changing world: evaluating practice to improve performance, Canadian Environmental Assessment Agency.
Schomer P., Suzuki Y., Saito F. (2001), Evaluation of loudness-level weightings for assessing the annoyance of environmental noise, Journal of the Acoustical Society of America, 110, 5, 2390–2397.
Stępień B. (2016), Confidence intervals for the longterm noise indicators using the kernel density estimator, Archives of Acoustics, 41, 3, 517–525.
The Act on the Protection of the Environment (Environmental Protection Law) (2001), [in Polish: Prawo ochrony środowiska], Dz.U. Nr 62, z dn. 27 kwietnia 2001 r., poz. 627, z późn. zm.
Vos J. (2001), On the annoyance caused by impulse sounds produced by small, medium-large, and large firearms, Journal of the Acoustical Society of America, 109, 1, 244–253.
Wszołek T. (2015), Tonal and impulsive adjustment for noise source rating levels, Progress of Acoustics, Polish Acoustical Society, Wrocław Division, pp. 413–426.
DOI: 10.1515/aoa-2017-0019