10.24425/aoa.2020.133146
The Primary Noise Control in the Work Environment by Increasing the Quality of Bearings and Effective Mounting of Machines
References
Argalášová L., Lekaviciute J., Jeram S., Ševcíková L., Jurkovicová J. (2013), Environmental noise and cardiovascular disease in adults: research in central, eastern and south-eastern europe and newly independent states, Noise and Health, 15(62): 22–31.
Balažikova M., Sinay J. (2012), Implementation of auditory and non-auditory effects of noise in the risk assessment process in mechanical engineering, Procedia Engineering, 48: 621–628, doi: 10.1016/j.proeng.2012.09.562.
Darula R., Žiaran S. (2011), An experimental study of optimal measurement point location for gear wheel state-of-wear measurements by means of vibro-acoustic diagnostics, Journal of Mechanical Engineering, 62(2): 61–79.
Flimel M. (2017), Possibilities of active reduction of noise in the workplace, Akustika, 28: 27–31.
Galovic R. (2006), Output quality and operation condition evaluation of gearings using vibroacoustic diagnostics, Acta Mechanica Slovaca, 1: 131–136.
ISO 5348-1998 (1998), Mechanical vibration and shock. Mechanical mounting of accelerometers, Case Postate 56, Genéve 20, Switzerland.
ISO 7919-1, Mechanical vibration of non-reciprocating machines. Measurement on rotating shafts and evaluation criteria. Part 1: General instructions, Case Postate 56, Genéve 20, Switzerland (withdrawn, publication date: 1996-07, next norm: ISO 20816-1:2016).
Izrael G., Bukoveczky J., Gulan L. (2011), Influence of nonstandard loads onto life of chosen modules of mobile working machines, Machine Design, 3(1): 13– 16.
Kreidl M., Šmíd R. (2006), Technical diagnostics, BEN, Prague.
Randal R.B. (2011), Vibration-based condition monitoring industrial, aerospace and automotive applications, John Wiley & Sons, Ltd.
Smagowska B., Pleban D. (2018), Noise testing methodology in the packing industry – recommendations noise reduction, [in:] Proceedings of 25th International Congress on Sound and Vibration 2018 (ICSV 25), Vol. 4, pp. 2419–2424, Hiroshima, Japan.
Šooš L., Kovác P., Križan P., Beniak J., Matúš M. (2016), New design of compacting machines and biofuel shapes, American Advanced Materials Congress, Miami, USA.
Tirinda P. (2009a), Monitoring of technical condition of rolling bearings by methods of vibration and thermovision diagnostics (1) [in Slovak], AT&P Journal, 6/2009: 16.
Tirinda P. (2009b), Monitoring of technical condition of rolling bearings by methods of vibration and thermovision diagnostics (3) [in Slovak], AT&P Journal, 8/2009: 14–15.
Tuma J. (2009), Signal Processing, Ostrava: Textbook VŠB – TU Ostrava, pp. 156.
Žiaran S. (2010), Vibro-and sound-isolation of the low-frequency noise of the building equipment, [in:] INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 2010, No. 8, pp. 3263–3272, Institute of Noise Control Engineering.
Žiaran S., Chlebo O. (2016), Noise control transmission methods of the combustion engine by means of reduction of the vibration, Archives of Acoustics, 41(2): 277–284, doi: 10.1515/aoa-2016-0027.
Žiaran S., Chlebo O. (2017), The transmission of vibroacoustic energy from the industrial machines through the building structure to the mounting base, [in:] Proceedings of 24th International Congress on Sound and Vibration 2018 (ICSV 24), Vol. 4, pp. 2513–2520, London, UK.
Žiaran S., Darula R. (2013), Determination of the state of wear of high contact ratio gear sets by means of spectrum and cepstrum analysis, Journal of Vibration and Acoustics ASME, 135(2): 021008-1–021008-10, doi: 10.1115/1.4023208.
Žiaran S., Musil M., Chlebo O. (2015), Determination of the bearing quality by means of vibroacoustic response, [in:] Proceedings of the ASME 2015 Noise Control and Acoustics Division Conference at Inter-Noise 2015. ASME 2015 Noise Control and Acoustics Division Conference, San Francisco, California, USA, August 9–12, 2015, V001T01A004, ASME, doi: 10.1115/NCAD2015-5910.
Žiaran S., Musil M., Chlebo O., Šooš L. (2015), Design of the inspection method for double-raw ball bearing in terms of vibration and noise level for automobile water pumps, Research Project of SjF STU in Bratislava.
DOI: 10.24425/aoa.2020.133146